|Place of Origin:||Jiangsu, China|
|Model Number:||PS Series|
|Minimum Order Quantity:||1 set|
|Packaging Details:||Shipping container|
|Delivery Time:||Within 40 Days after deposit|
|Payment Terms:||L/C, T/T|
|Supply Ability:||30 sets per month|
|Machine Type:||Sandblasting Room||Cleaning Type:||Sang Blasting|
|Cleaning Process:||Sand, Steel Shot, Steel Grit||Material:||Metal / Coil|
|Cleaning Standard:||SA2.5-SA3.0||Machine Condition:||New|
Two Spray Gun Automatic Sandblasting Room for Truck Body Cleaning
1. Mainly composed
With the Blasting Room, Air Blasting System, Sand Circulatory System, Dehumidify System and Dust Collector.
2. Abrasive Reclaim System
The reclaim system is determined by the type of abrasive being used, (screw conveyor vs.vacuum reclaim), your production requirements andbudget. Full reclaim floors are more costly but provide
continuous automatic recycling of abrasive. Partial reclaims and corner boxes require the operator
to sweep the abrasive to the reclaim system.If your parts are to be handled by forklifts, the reclaim
system must accommodate heavy floor loading.
3. Control system
PLC control, Error warning system on abrasive circle system, any error come, the above work will stop automatic.Control function underAutomatic control, hand controller and maintenance states will be control, so there are cascading protection feature among each process.
4. Dust remove system
Abrator dust stream generated when working through the primary separator and connecting pipe,
and then flow into the deposition of dust box, large particles are deposited, a small pipe into the dust and then by pulse jet bagfilter. Emissions of dust concentration after not more than 80mg/m3, in line with the provisions of the National Environmental Protection Agency emission standards not higher than 120mg/m3.
5. Shot distributing system
This machine adopts the patented shot valve produced of our company; it can accumulate a certain time in blast-peening, through themanual control to provide the shot ball to the blast-peening device.
1. Reply your inquiry in time.
2. Experienced staffs answer all your questions in time.
3. Customized design is available.
4. Exclusive and unique solution can be provided to our customer by our well-trained and professional engineers and staff.
5. Special discount and protection of sales are provided to our distributor.
6. Professional factory: We are manufacturer, specializing in producing all kinds of Shot Blasting Machine for more than 15 years, competitive with good quality.
7. As an honest seller, we always use superior raw material, advanced machines, skilled technicians to ensure our products to be finished in high quality and stable feature.
If you are interested in this equipment, please don't hesitate to contact us!
If the machine is not suitable for your workpiece, please tell us the following infromation:
1) What kind of workpiece will you clean?
2) The size of workpieces(length, width and height of maximum workpiece,Length, width and height of minimum workpiece?)
3) How many the weight of maximum and minimum workpiece?
4) Please tell us your requirement cleaning efficiency?
According to your infomation, the most suitable machines will be designed for your workpieces.
Contact Person: admin